top of page
DM3 side.jpg

Yamaha DM3 Dante 

Specification

  • Mixing Capacity

  • Input Channels: 16 mono + 1 stereo + 2 FX return

  • Mix Buses: 6

  • Matrices: 2 (Supports input to matrix)

  • Stereo Buses: 1

  • FX Buses: 2

  • Cue Buses: 1

  • I/O Connectors

  • Analog Input: 16 Mic/Line (12 XLR + 4 XLR/TRS Phones Combo)

  • Analog Output: 8 (XLR)

  • Dante: 2 (etherCON: Primary/Secondary)

  • Network: 1 (RJ-45)

  • USB TO HOST: 1 (USB Type-B, USB2.0)

  • USB TO DEVICE: 1 (USB Type-A)

  • Phones: 1 (TRS Phones)

  • DC: 1 (XLR 4pin, DC power IN)

  • User Interface: 1x 9-inch multi-touch screen, 9x faders (8 channels + 1 main), 1x "Touch and Turn" rotary encoder

  • Recording & Playback:

  • PC/Mac: Recording 18 track, Playback 18 track

  • USB storage device: Recording 2 track (USB hard disk / SSD / flash memory), Playback 2 track (USB hard disk / SSD / flash memory)

  • Sampling frequency rate: 96 kHz / 48 kHz

  • Signal delay: Less than 1.3 ms, (CH INPUT to OMNI OUT, Fs=96 kHz)

  • Frequency response: +0.5, -1.0 dB 20 Hz-20 kHz, reference to the nominal output level@1 kHz, INPUT to OMNI OUT

  • Total harmonic distortion: Less than 0.01 % 20 Hz - 20 kHz@+4 dBu into 10 kΩ, INPUT to OMNI OUT, Input Gain= Min

  • Hum & noise level:

  • Equivalent input noise: -126 dBu typ., Input Gain= Max.

  • Residual output noise: -84 dBu, ST main off

  • Dynamic range: 110 dB typ., DA Converter, 106 dB typ., INPUT to OMNI OUT, Input Gain=Min.

  • Crosstalk: -100 dB, adjacent INPUT/OMNI OUT channels, Input Gain= Min. @1 kHz

  • Power requirements: DC24 V/2.5 A, PA-L500 (100 V-240 V, 50 Hz/60 Hz)

  • Power consumption: 43 W

  • W: 320 mm H: 140 mm D: 455 mm 

  • Net weight: 6.5 kg 

About

The DM3-D is a compact Dante-equipped digital mixing console with versatile capabilities that make it perfect for a wide range of applications. The DM3 offers superb sound quality, fast and easy setup and operation, and professional-level features.

bottom of page